Kenwood KDC-X7013U Instruction Manual

42 | KDC-XBT8013U/ KDC-XBT8013UL/ KDC-X7013U/ KDC-X7013ULMenu Glossary• AMPSelecting “OFF” turns off the built-in amplifier.Turning off the built-in amplifier improves thequality of the sound from Preout.• Auto Answer (Setting the Time Interval forAutomatic Answer)This function automatically answers (respondsto) a call after lapse of the preset time interval forautomatic answer.“OFF” : Does not answer the phone callautomatically.“0” : Automatically answers the phone call at once.“1s” – “99s” : Automatically answers the phone callafter lapse of 1 – 99 seconds.⁄• If the time set in the cell-phone is shorter than that set inthe unit, the former will be used.• This function does not work for call waiting.• Call Beep (Setting the Beep of the Incoming Call)You can output a beep from the speaker when acall comes in.“ON” : Beep is heard.“OFF” : Beep is canceled.• CD ReadSets the method for reading CD.When unable to play special format CD, set thisfunction to “2” to force playing. Note that somemusic CD may be unplayable even when set to “2”.In addition, audio files cannot be played when setto “2”. Normally, keep this set to “1”.1 : Automatically distinguishes between audio filedisc and music CD when playing disc.2 : Forces playing as music CD.• Chinese (Chinese language setting)When this is set to ON, the following characterstrings are displayed in Chinese:Folder name/ File name/ Song title/ Artist name/Album name/ KCA-BT200/BT100 (optionalaccessory)• DisplayIf this unit is not operated at least 5 seconds with“OFF” selected, the display turns off. During a setupmode, the display will not turn off even if 5 secondslapse.• DISP DIM (Display illumination dimmer)Reduces the display Illumination brightness.AUTO: Dims the illumination in conjunction withthe Light switch of the vehicle.MNAL1: Dims the illumination constantly.MNAL2: Dims the illumination darker than MNA1.OFF: Does not dim the illumination.• DISP N/PSwitches the panel display between positiveor negative. In addition, you can reverse it inconjunction with the interior light.POSI1 : Displays the text in the positive.POSI2 : When the interior light is off, the text isdisplayed in the positive; when the interiorlight is on, the text is displayed in thenegative.NEGA1 : Displays the text in the negative.NEGA2 : When the interior light is off, the textis displayed in the negative; when theinterior light is on, the text is displayed inthe positive.• DTA (Digital Time Alignment)Make fine adjustment of the delay time of thespeaker output specified at (page 25) to have a more suitable environment foryour vehicle.The settings of the delay time are automaticallyidentified and compensated by specifying thedistances of each speaker from the center of thevehicle interior.1 Set the front and rear positions and the heightof the reference point to the position of the earsof the person sitting in the front seat, and setthe right and left positions to the center of thevehicle interior.2 Measure the distances from the reference pointto the speakers.3 Calculate the distance difference in accordancewith the farthest speaker.FRONTFRONTSUB-WREARREAR• BT DVC Status (Displaying the Bluetooth deviceStatus)You can display the connection status, signalstrength, and battery level.: Battery level of cell-phone.Full Nearly deadAppendix