Kenwood NX-300 Service Manual

Also see for NEXEDGE NX-300: Brochure Instruction manual Instruction manual Instruction manual Instruction manual

NX-30036TROUBLE SHOOTINGNote:• When using the ESN Validation function of NXDN Trunk-ing, the NXDN ESN number changes when the circuitboard is changed (the number is written on the circuitboard); the NXDN Trunking System cannot be accessed.Use the KPG-110SM on the NXDN Trunking System sideto reprogram the NXDN ESN number.• When a new printed circuit board is used, the KenwoodESN changes, as does the Transceiver Information dis-play of the KPG-111D, but this does not have any effecton the operation of the transceiver.• If changing to the original Kenwood ESN and NXDN ESN,please contact our service center.ADJUSTMENTControls12 ABC5 JKL08 TUV47GHIPQRS3DEF6MNOMIC#9WXYZPTT switch UniversalconnectorPower switch / VolumeSelectorOrange keySide1 keySide2 keyPanel Test Mode■ Test mode operation featuresThis transceiver has a test mode. To enter test mode,press and hold the [ ] key while turning the transceiverpower ON. Before the transceiver enters test mode, thefrequency version information appears on the LCD mo-mentarily. Test mode can be inhibited by programming. Toexit test mode, turn the transceiver power OFF. The follow-ing functions are available in test mode.Product NumberLabel (16 digits)NXDN ESNLabel (12 digits)Kenwood ESN LableCut-off LineNote: A UPC code and UPC barcode is not printed on theKenwood ESN Label. If necessary, cut the label at the cut-off line and attach only the serial number.