Kenwood NX-300 Service Manual

Also see for NEXEDGE NX-300: Brochure Instruction manual Instruction manual Instruction manual Instruction manual

NX-3008■ Removing the lithium cell (W09-0971-05)Insert a non-conductive screwdriver to groove of oneside of the socket (CN401) and pry the lithium cell upfrom the socket.■ Installing the lithium cell (W09-0971-05)Insert a lithium cell into one side of the socket (CN401).Push the lithium cell to insert the lithium cell into thesocket.■ Affixing the keyboard ASSY (S79-0472-05)Affix the keyboard ASSY to the Control unit as shown inthe fi gure.After affixing the keyboard ASSY to the Control unit,confirm that the three positioning holes of the keyboardASSY and the Control unit are not misaligned.Note:If the holder (Option board) is removed from the Controlunit, it becomes easy to confirm the three positioningholes.Positioning holes Control unitKeyboardASSY■ Inserting the Volume and Channel switch intothe chassisInsert the volume and channel switch into the chassiswith the VOL/CH FPC formed as shown in the figure.VOL/CH FPC■ Forming the VOL/CH FPC, Cord ASSY and Uni-versal connector FPCForm the VOL/CH FPC, Cord ASSY and Universal con-nector FPC as shown in the figure.VOL/CH FPCUniversalConnector FPCCord ASSYNote:Fold indications are printed on the Cord ASSY and Uni-versal Connector FPC.“––––” line shows creased line on the top.“- - - -” line shows creased line on the bottom.CONTTX-RXJ87-0005J87-0007Cord ASSYUniversal Connector FPCDISASSEMBLY FOR REPAIR