(No.RA020)1-13NX-5700(B) External ViewATTENTION:When installing the option, please take measures to preventstatic electricity.2.3.1 Ignition Sense Cable (KCT-46: Option)The KCT-46 is an optional cable for enabling the ignition func-tion. The ignition function lets you turn the power to the transceiv-er on and off with the car ignition key.2.3.1.1 Connecting the KCT-46 cable to the transceiver(1) Open the KCT-46 fuse holder and insert a mini blade fuse(3A). <1>(2) While holding a clear protective cover, remove the blackcap at the end of the yellow cable (ignition sense cable) ofthe transceiver. <2>(3) Connect the plug of the KCT-46 to the yellow cable termi-nal of the transceiver. <3>(4) Connect the other end of the KCT-46 to the ignition line ofthe car. <4>Note:You must setup using the KPG-D1/D1N. Fig.1148.517115148(170)M42435 47CAUTION! AVOID CON TACT DURING PROLONGED USE.HOT SUR FACEFCC RULES. OPER ATION IS SUBJECT TO THETHIS DEVICE COMPLIES WITH PART 15 OF THEFOLLOWING TWO CONDITIONS : (1) THIS DEVICECAUSE UNDESIRED OPERATION. 70700MAY NOT CAUSE HARMFUL INTERFERENCE, ANDRECEIVED, INCLUDING INTERFERENCE TH AT MAY(2)THIS DEVICE MUST ACCEPT ANY INTERFERENCEDC13.6V ??AVHF DIGITAL TRANSCEIVERNX-5700FCC ID:ALHXXXXXX000000 000000-FMade in JapanIC:282F-XXXXXX68BBCCDDDDDDIC MODEL:NX-5700-F68BBCDEEFGHJJJJJJVC KENWOOD CorporationS/NO.B4A0000036BBCCCCCCIgnition lineof the carF52-0019-05<1><2><3><4>
