(No.RA020)1-71Test cable for microphone input (E30-3360-28)MIC connector (Front panel view)Tuning cable (E30-3383-05 or E30-7754-05)Adapter cable (E30-3383-05 or E30-7754-05) is required forinjecting an audio if PC tuning is used.See “PC Mode” section for the connection.4.17 Radio check Section3245678312456781 GREENREDBLACKBLUESHIELDWHITEGRAYYELLOWPTTEMIC-EMICHK1 : BLC2 : +B3 : GND4 : PTT/TXD (PC serial data from radio)5 : MICE6 : MIC7 : HOOK/RXD (PC serial data to radio)8 : DM18 Lead wire +MICShield wire –Illust is E30-3383-05.Item Condition Measurement Adjustment Specifica-tions/RemarksPanel testmodePC test mode Test-equipmentUnit Terminal Unit Parts Method1.Frequencycheck1)CH-Sig: 1-1PTT: ON1)Test ChannelChannel: 1Test Signaling Mode: AnalogSignaling: 1PTT: Press [Transmit] button.f. counter Panel ANT Check aninternaltempera-ture ofradio from20°C to33°C.±0.25ppm±38.7Hz@155.1MHz2.Highpowercheck1)CH-Sig: 1-1PTT: ONTA: OFF1)Test ChannelChannel: 1Test Signaling Mode: AnalogSignaling: 1PTT: Press [Transmit] button.PowermeterAmmeterPanel ANT Check 21W~29W9A or less2)CH-Sig: 2-1PTT: ONTA: OFF2)Test ChannelChannel: 2Test Signaling Mode: AnalogSignaling: 1PTT: Press [Transmit] button.PowermeterAmmeterPanel ANT Check 21W~29W9A or less3)CH-Sig: 3-1PTT: ONTA: OFF3)Test ChannelChannel: 3Test Signaling Mode: AnalogSignaling: 1PTT: Press [Transmit] button.PowermeterAmmeterPanel ANT Check 21W~29W9A or less
