53 GETTING ACQUAINTEDq ELAppears when the transmit output power is set to Low(“L”) or Economic Low (“EL”) {pages 7, 41}.w HAppears when the transmit output power is set toHigh (“H”) {pages 7, 41}.e LSBAppears when lower side band (LSB) is selected forB-band {page 34}.r USBAppears when upper side band (USB) is selected forB-band {page 34}.t CWAppears when CW is selected for B-band {page 34}.y WFMN“WFM” appears when wide FM mode is selected{page 34}. “FM” appears when normal FM mode isselected. “FMN” appears when narrow FM mode isselected {page 39}.u AM“AM” appears when AM mode is selected {page 34}.iAppears when a Priority Scan is activated {page 25}.o FINEAppears when a Fine Tuning function is activated{page 35}.!0 VOXAppears when the VOX function is activated{page 41}.!1Appears when the Automatic Simplex Check (ASC) isactivated {page 14}.!2Appears when the Lock function is ON {page 38}.!3Appears when the function key is pressed.!4S-meter (RX) and relative RF power meter (TX).!5 CT“CT” appears when the CTCSS function is activated{page 28}.!6Appears when the Tone function is activated{page 13}.!7 DCSAppears when the DCS function is activated{page 29}.!8 +/ –/Appears when the repeater shift function is activated{page 12}.!9 RAppears when the Reverse function is activated{page 14}.@0Appears when the Tone Alert function is activated{page 40}.@1Appears when the displayed memory channel hasbeen locked out {page 27}.@2 Dot-matrix display76 x 16 dot-matrix display. It displays variousinformation, such as the operating frequencies, menusettings, and etc.DISPLAY1411521222 3 4 5 6 7 8 9 10 11 12 1316 17 18 19 20