Kenwood TH-F6A Instruction Manual

Also see for TH-F6A: Service manual Instruction manual Supplemental service manual Service manual Quick reference

Contents

196 MEMORY CHANNELS993~0lennahC a 993~0lennahCycneuqerfevieceR a ycneuqerfevieceRycneuqerftimsnarT a ycneuqerftimsnarTycneuqerfenoT a ycneuqerfenoTnoitceridtesffO a noitceridtesffOycneuqerfSSCTC a ycneuqerfSSCTCedocSCD a edocSCDSCD/SSCTC/enoTsutatsFFO/NO a SCD/SSCTC/enoTsutatsFFO/NOycneuqerftesffO a ycneuqerftesffONOesreveR a NOesreveRezispetsycneuqerF a ezispetsycneuqerFlennahcyromeMeman a lennahcyromeMemanNOgninuTeniF a NOgninuTeniFnoitcelesedoM a noitcelesedoMlennahCyromeMFFO/NOtuokcoL a lennahCyromeMFFO/NOtuokcoL993~0lennahC a ,1rP,9U/9L~0U/0L9–I~0–Idna2rPycneuqerfevieceR a ycneuqerfevieceRycneuqerftimsnarT a ycneuqerftimsnarTycneuqerfenoT a ycneuqerfenoTnoitceridtesffO a noitceridtesffOycneuqerfSSCTC a ycneuqerfSSCTCedocSCD a edocSCDSCD/SSCTC/enoTsutatsFFO/NO a SCD/SSCTC/enoTsutatsFFO/NOycneuqerftesffO a ycneuqerftesffONOesreveR a NOesreveRezispetsycneuqerF a ezispetsycneuqerFlennahcyromeMeman a lennahcyromeMemanNOgninuTeniF a NOgninuTeniFnoitcelesedoM a noitcelesedoMlennahCyromeMNOtuokcoL a lennahCyromeMFFOtuokcoLThe tables above illustrate how data is transferredbetween memory channels.Note: When transferring an odd-split channel, the Reversestatus, Offset direction, and Offset frequency are not transferred{page 15}.CALL CHANNELThe Call channel can be recalled instantly nomatter what frequency the transceiver is operatingon. For instance, you may use the Call channel asan emergency channel within your group. In thiscase, the Call Scan {page 25} will be useful.The default Call channel frequencies are144.000 MHz for the 2 m band, 223.000 MHz for1.25 m band (TH-F6A), 430.000 MHz (TH-F7E)/440.000 MHz (TH-F6A) for the 70 cm band. EachCall channel can be reprogrammed either as asimplex or odd-split channel.Note: Unlike Memory channels 0 to 399, the Call channel cannot becleared. Clearing the Call channel will set it to the factory defaultvalues.RECALLING THE CALL CHANNEL1 Press [BAND] to select an amateur radio band.2 Press [CALL] to recall the Call channel for thatoperating band.• The Call channel frequency and “C” appear.• To return to the previous frequency, press[CALL] again.REPROGRAMMING THE CALL CHANNEL1 Press [BAND] to select your desired amateurradio band.2 Select your desired frequency and related data(Tone, CTCSS, DCS, or offset direction, etc.).• When you program the Call channel as an odd-split channel, select a receive frequency first.3 Press [F], [CALL].• The selected frequency and related data arestored in the Call channel for the selectedband.To also store a separate transmit frequency, continuewith the following steps.4 Select the desired transmit frequency.5 Press [F].6 Press [PTT]+[CALL].• The separate transmit frequency is stored inthe Call channel.Note:uThe transmit frequency must be on the same band as thereceive frequency band.uCall channel data is shared between the A and B-band.uThe Reverse status cannot be not stored in the Call channel.uWhen you recall an odd-split Call channel, “+” and “–” appear onthe display.uTransmit offset status and Reverse status are not stored in anodd-split Call channel.uWhen you revise only the transmission frequency for the odd-splitCall channel, the frequency step size must be the same as theoriginal odd-split Call channel memory data.