Kenwood TK-3173 Instruction Manual

Also see for TK-2170 SERIES: Service manual Function reference Instruction manual Specifications Service manual

24SCANIf the Scan function is programmed, zones or channels can bescanned by pressing the key programmed as Scan. Scancan be used as either Single Scan, Multi Scan, or List Scan(TK-3173 only).ï Single Scan monitors only the channels of the currently selectedzone, which have been added to the scanning sequence. If setup to scan the Priority channel, the Priority channel will bescanned even if it is not within the currently selected zone.ï Multi Scan monitors all channels of every zone, which have beenadded to the scanning sequence.ï List Scan monitors all channels within the specified range ofzones, which have been added to the scanning sequence. If setup to scan the Priority channel, the Priority channel will bescanned even if it is not within any of the zones in the list.To activate Scan, press the key programmed as Scan.ï The icon and ì î or the revert zone and channel/ groupID number appear on the display.ï The zone add indicator ( ) will appear on the displaywhen the selected zone is added to the scan sequence. Thechannel/ group ID add indicator ( ) will appear on thedisplay when the selected channel/ group ID is added to the scansequence.ï When a call is received, scanning stops and the zone andchannel/ group ID digits appear. Press the PTT switch and speakinto the microphone to respond to the call. The transceiver willcontinue scanning after a predetermined time delay if the PTTswitch is released and no further signal is received.To stop scanning, press the Scan key again.