293 In Selcall Mode, press the and C> keys, rotate theselector, or enter an appropriate number using theDTMF keypad to select the ID of the station you wantto call.ï Alternatively, press and hold the S or key to enterManual Dialing mode. Using Manual Dialing, you canenter digits with the DTMF keypad or selector. Whenusing the selector, rotate it to select a digit, then press theC> key to accept the digit. Repeat this process until theentire ID is entered.4 Press the S key to enter Status Mode.5 Press the and C> keys, rotate the selector, or enteran appropriate number using the DTMF keypad toselect the status ID you want to transmit.ï Alternatively, press and hold the S or key to enterManual Dialing mode. Using Manual Dialing, you canenter digits with the DTMF keypad or selector. Whenusing the selector, rotate it to select a digit, then press theC> key to accept the digit. Repeat this process until theentire ID is entered.6 Press the PTT switch to make the call or the Side 2key to page the selected recipient.ï Alternatively, press the Call 1 or Call 2 key to transmittheir pre-programmed status messages.ï ì î appears on the display when the call hasbeen successfully transmitted.■ RECEIVINGThe icon will flash and a calling ID or text message willappear when a Status call is received.Press any key to return to normal operation.
