Kenwood TK-5210 K Service Manual

Also see for TK-5210: Specifications Instruction manual Specifications Instruction manual Service manual

TK-521046ADJUSTMENTADJUSTMENT• Panel tuning• PC tuningConnect the wires to the PCB in the connector case ofinterface cable.For output the wires out of the connector case, need toprocess the connector case.11 : GREEN (5M)TUBESCREW8 : YELLOW (PF SW)2 : RED (RX AF OUTPUT)3 : BLACK (RX AF OUTPUT)10 : BROWN (GND)6 : BROWN (MIC GND)5 : WHITE (MIC INPUT)7 : BLUE (PTT SW) GND → ONRED (2)BLK (3)100μ 10V100μ 10V8ΩWHT(5)BRN (6)BLU (7)BRN (10)PTT SW+++To transceiverAF VoltmeterAudio generator10μ 10VConnector caseKPG-36Remove thescrewPCB layoutShieldAF voltmeterAudio generator100μ 10V100μ 10V10μ 10V+++8ΩHow to Remove the Flat Cable1. Gently draw out both sides of the connector lever uni-formly in the direction of the arrow with tweezers.(CN7, CN19, CN604, CN751, CN752, CN753)CN19, CN604, CN751: K2 and K3 models only2. Gently rise up the connector lever in the direction of thearrow with a flat-head screwdriver or tweezers.(CN603)Note : Gently push both sides of the connector lever, whenput in the flat cable.TweezersFlat cableLeverFlat-headscrewdriverFlat cableLever3. Gently depress the connector lever in the direction of thearrow with a flat-head screwdriver or tweezers.(CN902, CN903)LeverFlat cableFlat-headscrewdriver