Kenwood TK-7180 Instruction Manual

Also see for TK-7180: Modification Information Function reference Brochure & specs Specification Service manual

3INSTALLING THE TRANSCEIVERFor passenger safety, install the transceiver securely using the supplied mounting bracket andscrew set so the transceiver will not break loose in the event of a collision.1 Mark the position of the holes in the dash by using the mounting bracket as atemplate. Drill the holes, then attach the mounting bracket using the suppliedself-tapping screws.• Be sure to mount the transceiver in a location where the controls are within easyreach of the user and where there is sufficient space at the rear of the transceiver forcable connections.2 Connect the antenna and the supplied power cable to the transceiver.3 Slide the transceiver into the mounting bracket and secure it using thesupplied hex-headed screws.4 Mount a microphone hanger in a location where it will be within easy reach ofthe user.• The optional microphone and microphone cable should be mounted in a place wherethey will not interfere with the safe operation of the vehicle.When replacing the fuse in the DC power cable, be sure to replace it with a fuse of the same value.Never replace a fuse with a fuse that has a higher value.Hex-headedscrewsDC powercableMounting bracketAntennaconnectorPower inputconnectorFuseBlack (–)cable Red (+)cable12 V vehiclebatteryOptional microphoneSelf-tapping screwSpring washerFlat washerIgnitionsense cable