Kenwood TK-7180 Instruction Manual

Also see for TK-7180: Modification Information Function reference Brochure & specs Specification Service manual

15FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTIONFleetSync is an Alphanumeric 2-way Paging Function, and is a protocol owned byJVC KENWOOD Corporation. FleetSync enables a variety of paging functions onyour transceiver, some of which depend on dealer programming.Note: Your transceiver functions include either Fleetsync or 5-tone Signaling {page 13}, but notboth.SELCALL (SELECTIVE CALLING)A Selcall is a voice call to a particular station or to a group of stations.■ T RANSMITTING1 Select your desired zone and channel.2 Press the key programmed as Selcall or Selcall + Status to enter SelcallMode.3 Press the and C> keys to select the ID of the station you want to call.• If programmed by your dealer, you can also use the and keys.• Alternatively, you can enter a station ID using a DTMF keypad.• If Manual Input Mode is enabled, you can enter digits by using a DTMF keypador by selecting digits with the and keys. To enter manual input mode, firstpress and hold the S or DTMF key. When using the and keys, cyclethrough the digits to select a digit, then press the C> key to accept the digit andshift the cursor to the right. Repeat this process until the entire ID is entered.4 Press the microphone PTT switch and begin your conversation.• Alternatively, you can press the ■ key to page the selected station, rather thanmaking a voice call.■ R ECEIVINGAn alert tone will sound, the transceiver will automatically enter Selcall Mode,and the calling station’s ID will appear when a Selcall is received.To respond to the call, press the microphone PTT switch and speak into themicrophone.■ I DENTIFICATION CODESAn ID code is a combination of a 3-digit Fleet number and a 4-digit ID number.Each transceiver must have its own Fleet and ID number.• Enter a Fleet number (100 ~ 349) to make a group call.• Enter an ID number (1000 ~ 4999) to make an individual call in your fleet.• Enter a Fleet number make a call to all units in the selected fleet (Interfleet call).• Select “ALL” Fleet and enter an ID number to make a call to the selected ID in allfleets (Supervisor call).• Select “ALL” Fleet and “ALL” ID to make a call to all units (Broadcast call).Note: The ID range may be limited by programming.