145 Press the and C> keys to select the status ID you want to transmit.• If programmed by your dealer, you can also use the and keys.• Alternatively, you can enter a station ID using a DTMF keypad.• If Manual Input Mode is enabled, you can enter digits by using an optional DTMFkeypad or by selecting digits with the and keys. To enter manual input mode,first press and hold the S or DTMF key. When using the and keys, cyclethrough the digits to select a digit. The cursor can be shifted to the left or right bypressing the or C> key. Repeat this process until the entire ID is entered.6 Press the Call 1 to Call 6 key to initiate the Status call.RECEIVING SELCALLS AND STATUS MESSAGESWhen you receive a signal containing the correct tones, squelch opens and youwill hear the call.• The LED indicator flashes orange.• To mute the speaker after squelch opens, press the key programmed as Monitor.• Your dealer can program the Monitor function to close again after a specific time periodelapses.• If Transpond for 5-tone Signaling is programmed, an acknowledgement signal isreturned to the calling station.• If Call Alert for 5-tone Signaling is programmed, an alert tone will sound when thecorrect tones are received.• Your dealer can program the transceiver to display the received Selcall/Status.To respond to the call, press the microphone PTT switch and speak into themicrophone.REVIEWING MESSAGES IN THE QUEUE MEMORYA maximum of 15 received messages can be stored in the Queue memory ofyour transceiver. Saved messages can be viewed after reception. When theQueue memory is full, the oldest message will be erased when a new message isreceived.Then icon lights when a message is stored in the Queue memory.1 Press the key programmed as Queue to enter Queue Mode.2 Press the and C> keys to select the desired message.• If programmed by your dealer, you can also use the and keys.• Press and hold the S or DTMF key to toggle between the called ID/ status ID, thechannel name, and the time of the received message.3 Press the S or DTMF key to return to Normal Operation Mode.• To delete the selected message, press the A or DTMF # key. To confirm thedeletion, press the S or DTMF key.• To delete all messages, press and hold the A or DTMF # key for 1 second. Toconfirm the deletion, press the S or DTMF key.
