Kenwood TK-7180 Instruction Manual

Also see for TK-7180: Modification Information Function reference Brochure & specs Specification Service manual

11SCAN REVERTYou can select Revert zones and channels using the Zone and CH/GID keys.Eight types of Scan Reverts which can be programmed by your dealer areavailable.• Last Called Revert: The last zone/ channel received is assigned as the new revertzone and channel.• Last Used Revert: The last zone/ channel responded to is assigned as the new revertzone and channel.• Selected: The last zone/ channel selected is assigned as the new revert zone andchannel.• Selected + Talkback: If the zone/ channel has been changed during Scan, thenewly selected zone/ channel is assigned as the new revert zone and channel. Thetransceiver “talks back” on the current receive channel.• Priority 1: If your dealer has programmed a Priority 1 channel, this channel is therevert zone and channel.• Priority 1 + Talkback: If your dealer has programmed a Priority 1 channel, this channelis the revert zone and channel. The transceiver “talks back” on the current receivechannel.• Priority 2: If your dealer has programmed a Priority 2 channel, this channel is therevert zone and channel.• Priority 2 + Talkback: If your dealer has programmed a Priority 2 channel, this channelis the revert zone and channel. The transceiver “talks back” on the current receivechannel.PRIORITY SCANA Priority channel must be programmed in order for Priority Scan to function.The transceiver will automatically change to the Priority channel when a signal isreceived on it, even if a signal is being received on a normal channel.• The indicator represents the Priority 1 channel.• The indicator represents the Priority 2 channel.• The indicator represents both the Priority 1 and Priority 2 channel.