6DISPLAYIndicator DescriptionDisplays the zone and channel numbers. Your dealer canprogram zone and channel names with up to 12 characters,in place of numbers. Also displays received 5-tone andFleetSync messages.Displays the zone and channel numbers. Also displays listnumbers for Operator Selectable Tones.Displays the strength of received signals. An antenna and all3 strength bars represents strong signals while the antennaby itself (no strength bars) represents weak signals.Appears when Monitor or Squelch Off is activated.Appears when the Talk Around function has been activated.Appears when you are using Scan mode or when the selectedzone is a Voting or Free Channel Call zone.Flashes when you receive a message. Lights when amessage is stored in the queue memory.Appears when the selected channel is programmed aspriority. represents Priority Channel 1, represents PriorityChannel 2, and represents Priority Channels 1 and 2.This icon is not used on this transceiver.Appears when the Horn Alert function is activated.Appears when the Scrambler function is activated.Appears when the Public Address function is activated.Appears when the selected zone is added to the scanningsequence.Appears when the Auto Recording function on the VGS-1option is activated.Appears when an Auto Reply Message on the VGS-1 optionis activated.Appears when the selected channel is added to the scanningsequence.Appears when the AUX A function has been activated.Appears when the AUX B function has been activated.Appears when the OST function has been activated.