Kenwood TM-261A Instruction Manual
Also see for TM-261A: Instruction manualInstruction manualInstruction manualInstruction manualInstruction manual
                                                                |
@ Simplex Memory Channels1 Select the desired frequency and associated data(Tone, CTCSS, DTSS, etc.) using VFO mode,Memory Recall {page 26}, or the Call channel{page 27}.Press [F] to enter Function Select mode.« “FP” and a memory channel number appear.SHIFTTurn the Tuning control, or press microphone[UP])[DWN], to select the desired memory channel.Press [MR].* The selected frequency and associated data arestored in the memory channel. A transmit frequencyfrom a split memory channel or split Call channel is notstored.* Ifthe memory channel selected in the previous stepalready contained data, the new data overwrites theprevious data.¢ The previous mode is restored.Note: After completing each of Steps 2 and 3, you must execute thenext step within approximately 10 seconds or the previous made isrestored.@ Split Memory Channels1 Select the desired receive frequency, and associateddata (Tone, CTCSS, DTSS, etc.) using VFO mode,Memory Recall {page 26} or the Call channel{page 27}.Press [F] to enter Function Select mode.¢ “F’ and amemory channel number appear.Turn the Tuning control, or press microphone[UP]/[DWN], to select the desired memory channel.Press [MR] (1 s).° “—+” appears.3MHz REV¢ The channel number is visible if using Memory Recallmode and the Cail channel “C” is visible if using Callchannel mode in Step 1.Turn the Tuning control, or press microphone[UP]/[DWN], to select the desired transmitfrequency.25 |
Related manuals for Kenwood TM-261A
manualsdatabase
Your AI-powered manual search engine