Kenwood TM-271 Instruction Manual

Contents

113yAppears when the Automatic Simplex Check (ASC)function is activated {page 26}.uAppears when the Priority Scan function is activated{page 43}.iAppears when the Weather Alert function is activated{page 36}. (K market models only.)oAppears when narrow FM Mode is selected {page 60}.!0Displays the frequencies, Menu settings, Memory nameand other information.!1Displays the Menu No., Memory Channel number, andstatus {pages 18, 29}.!2Appears when the displayed Memory Channel has data{page 29}.!3Appears when the Key Lock function is ON {page 58}.!4Appears when the Memory Channel Lockout function isON {page 44}.!5Shows the strength of transmitted {page 15} and received{page 54} signals.indicates the squelch is open and the frequency is“busy”. It also appears when the squelch is set tominimum {page 14}. If using CTCSS or DCS, it indicatesthe squelch is open due to a received signal thatcontains the same CTCSS tone or DCS code that is setin your transceiver.acts as an S-meter whilereceiving and an RF power meter while transmitting.indicates the transceiver is transmitting.!6Appears when the function key is pressed.!7H appears when high power transmission is selectedand L appears when low power is selected {page 15}.(“M” is not used on this transceiver.)