Kenwood TM-271 Instruction Manual

Contents

428MEMORY SCANMemory Scan monitors Memory Channels in which youhave stored frequencies.ALL-C HANNEL S CANThe transceiver scans all of the Memory Channels inwhich you have stored frequencies.1 Press [MR] (1s).• Scan starts from the last Memory Channel number andascends up through the channel numbers (default).• To jump to a desired channel while scanning, quicklyturn the Tuning control.• To reverse the scan direction, turn the Tuning control orpress Mic [UP]/[DWN].2 Press any key other than [F] or [ ] (Power) to stopAll-Channel Scan.Note:◆ You must have 2 or more Memory Channels that contain data,excluding special function Memory Channels (L0/U0 ~ L3/U3, Pr,and AL).◆ You can perform Memory Scan while in CH Display Mode. WhileScan is paused, the Channel number blinks.GROUP S CANThe transceiver scans Memory Channels in groups of 20channels. When Menu No. 15 (M.CH) is set to 100, thetransceiver uses 5 groups of 20 channels. When MenuNo. 15 (M.CH) is set to 200, the transceiver uses 10groups of 20 channels.1 Press [MR] and turn the Tuning control or press Mic[UP]/[DWN] to select a Memory Channel in the rangeof the group you want to scan.2 Press [MENU] (1s).• Scan starts from the selected Memory Channel numberand ascends up through the channel numbers (default).• To reverse the scan direction, turn the Tuning control orpress Mic [UP]/[DWN].3 Press any key other than [F] or [ ] (Power) to stopGroup Scan.Note: You must have 2 or more Memory Channels in the selectedgroup that contain data.slennahC001 slennahC002:1puorG 91~0 :1puorG 91~0:2puorG 93~02:2puorG 93~02 :3puorG 95~04:4puorG 97~06:3puorG 95~04 :5puorG 99~08:6puorG 911~001:4puorG 97~06 :7puorG 931~021:8puorG 951~041:5puorG 99~08 :9puorG 971~061:01puorG 991~081