Kenwood TS-890S Command Reference Manual

Also see for TS-890S: Instruction manual Setting manual In-depth manual Manual Service bulletin

– 33 –PC CONTROLCOMMAND REFERENCE GUIDEFM1 Frequency Marker List Registration Parameters:P1 (Additional frequency to frequency marker list)11 digits in Hz Unused upper digits must be entered as “0”.• Use the setting command 1, you can register the currentreceiving frequency.• Use the setting command 2, you can register the specifiedfrequency.• You cannot be newly registered when the total number ofregistrations has reached 50.• You cannot register already registered frequencies.Set 11 2 3 4 5 6 7 8 9 10F M 1 ;Set 21 2 3 4 5 6 7 8 9 10F M 1 P1 P1 P1 P1 P1 P1 P111 12 13 14 15 16 17 18 19 20P1 P1 P1 P1 ;FM2 Total Number Registered of Frequency Marker List Parameters:P1 (Total number)00~50Read1 2 3 4 5 6 7 8 9 10F M 2 ;Answer1 2 3 4 5 6 7 8 9 10F M 2 P1 P1 ;FM3 Frequency Marker List Readout Parameters:P1 (List number)01~50 The list number is not displayed on the transceiver, It is 01,02, ... in order from the top.P2 (Frequency of the specified list number）11 digits in Hz Unused upper digits must be entered as “0”.• If the specified P1 parameter is exceeds the total numberregistered, parameter P2 is all 0.• Even when the AI function is ON, this command does notautomatically respond.Read1 2 3 4 5 6 7 8 9 10F M 3 P1 P1 ;Answer1 2 3 4 5 6 7 8 9 10F M 3 P1 P1 P2 P2 P2 P2 P211 12 13 14 15 16 17 18 19 20P2 P2 P2 P2 P2 P2 ;FM4 Frequency Marker List Delete Parameters:P1 (List number)01~50 The list number is not displayed on the transceiver, It is 01,02, ... in order from the top.P2 (Frequency to be deleted from the list)11 digits in Hz Unused upper digits must be entered as “0”.• Use the setting command 1, you can delete all registeredfrequencies.• Use the setting command 2, you can delete a frequency withthe specified list number.• Use the setting command 3, you can delete only the specifiedfrequency. If the specified frequency is not registered in the list,an error occurs.Set 11 2 3 4 5 6 7 8 9 10F M 4 ;Set 21 2 3 4 5 6 7 8 9 10F M 4 P1 P1 ;Set 31 2 3 4 5 6 7 8 9 10F M 4 P2 P2 P2 P2 P2 P2 P211 12 13 14 15 16 17 18 19 20P2 P2 P2 P2 ;FR Receiver Function (VFO A / VFO B / Memory channel) Parameters:P10: VFO A1: VFO B3: Memory Channel• When using this command to select VFO A or VFO B, theselected VFO changes to the simplex mode.• When using this command to select Memory Channel, itswitches to simplex mode or split mode depending on therecalled channel.Set1 2 3 4 5 6 7 8 9 10F R P1 ;Read1 2 3 4 5 6 7 8 9 10F R 」;Answer1 2 3 4 5 6 7 8 9 10F R P1 ;