Kenwood TS-890S Command Reference Manual

Also see for TS-890S: Instruction manual Setting manual In-depth manual Manual Service bulletin

– 42 –PC CONTROLCOMMAND REFERENCE GUIDEMA2 Memory Channel (Channel Name) Parameters:P1 (Channel number)000 ~ 119 Channels P0 ~ P9 are represented as 100 ~ 109 andchannels E0 ~ E9 are represented as 110 ~ 119.P2 (Unused (1 digit))Always a spaceP3 (Name)Up to 10 characters• Setting an unassigned channel causes an error.• When the AI function is ON, a response is provided by the MA0command.Set1 2 3 4 5 6 7 8 ~ xM A 2 P1 P1 P1 P2 P3 ;MA3 Memory Channel (Scan Lockout) Parameters:P1 (Channel number)000 ~ 119 Channels P0 ~ P9 are represented as 100 ~ 109 andchannels E0 ~ E9 are represented as 110 ~ 119.P2 (Scan lockout state)0: Scan Lockout OFF1: Scan Lockout ON• Setting an unassigned channel causes an error.• When the AI function is ON, a response is provided by the MA0command.Set1 2 3 4 5 6 7 8 9 10M A 3 P1 P1 P1 P2 ;MA4 Memory Channel (Channel Copy) Parameters:P1 (Original channel number)000 ~ 119 Channels P0 ~ P9 are represented as 100 ~ 109 andchannels E0 ~ E9 are represented as 110 ~ 119.P2 (Target channel number)000 ~ 119 Channels P0 ~ P9 are represented as 100 ~ 109 andchannels E0 ~ E9 are represented as 110 ~ 119.• If the original channel number is an unassigned channel orProgrammable VFO, it cannot be copied.Set1 2 3 4 5 6 7 8 9 10M A 4 P1 P1 P1 P2 P2 P2 ;MA5 Memory Channel (Channel Deletion) Parameters:P1 (Channel number)000 ~ 119 Channels P0 ~ P9 are represented as 100 ~ 109 andchannels E0 ~ E9 are represented as 110 ~ 119.Set1 2 3 4 5 6 7 8 9 10M A 5 P1 P1 P1 ;MA6 Programmable VFO End Frequency Parameters:P1 (Programmable VFO number)100 ~ 109 Channels P0 ~ P9 are represented as 100 ~ 109.P2 (11 digit end frequency in Hz) Blank digits must be entered as “0”.• You cannot set an unassigned channel.• Use the MA1 or MI command to register a new ProgrammableVFO (the start and end frequency are the same).• When the AI function is ON, a response is provided by the MA0command.Set1 2 3 4 5 6 7 8 9 10M A 6 P1 P1 P1 P2 P2 P2 P211 12 13 14 15 16 17 18 19 20P2 P2 P2 P2 P2 P2 P2 ;