Kenwood VR-716 Instruction Manual

Also see for VR-716: Service manual Instruction manual

21 ENListening to radio broadcastsThe receiver can store up to 40 stations in the memory and recall themby one-touch operation.Tuning radio stations1Use the INPUT SELECTOR knob or TUNER key to select thetuner.2Use the BAND key to select the desired broadcast band.Each press switches the bandas follows:1 FM2 AM3Use the AUTO key to select the desired tuning method.Each press switches the tuning method as follows:1 AUTO lit (auto tuning)2 AUTO not lit (manual tuning)• Normally, set to “AUTO” (auto tuning). If the radio waves are weakand there is a lot of interference, switch to manual tuning. (Withmanual tuning, stereo broadcasts will be received in monaural.)4Use the MULTI CONTROL knob or Multi %/ fi, or Tune – 1/ +¡keys to select the station.Auto tuning : The next station is tuned automatically.Manual tuning : Turn the knob (press the key) to select thedesired station.“AM” or “FM” indicatorappears in the display“AUTO” indicator lightsup in the display.Frequencydisplay“TUNED” is displayedwhen a station is received.“ST.” lights whena broadcast is beingreceived in stereo.Proceed to step 3 within 5 seconds.(If more than 5 seconds elapse, press the MEMORY key again).Blinks for 5 seconds Lights for 5 seconds4¢ + ++MULTI CONTROLINPUT SELECTORBAND AUTOTUNERAutoBandTune 1 / + ¡Multi % / fiPresetting radio stations manuallyMULTI CONTROLMEMORY1Tune to the station you want to store.2Press the MEMORY key while receiving the station.3Use the MULTI CONTROL knob or Multi %/ fikeys to selectone of the station presets (1 – 40).4Press the MEMORY key again to confirm the setting.• Repeat steps 1, 2, 3, and 4 to store as many stations asnecessary.• If you store a station at a previously used preset, the previous stationwill be replaced by the new one.