Kenwood VR-716 Instruction Manual

Also see for VR-716: Service manual Instruction manual

39 ENSpecifications Caution : Read this page carefully to ensure safeoperation.AUDIO sectionRated power output during STEREO operationEffective power output during SURROUND operationFRONT (40 ~ 20 kHz, 0.7% T.H.D. at 8Ω one channel driven)............................................................................... 100 W + 100 WCENTER (40 ~ 20 kHz, 0.7% T.H.D. at 8Ω one channel driven).............................................................................................. 100 WSURROUND (40 ~ 20 kHz, 0.7% T.H.D. at 8Ω one channel driven)100 W + 100 WSUBWOOFER (80 Hz, 0.7% T.H.D. at 8Ω one channel driven).............................................................................................. 100 WTotal harmonic distortion .......................... 0.05% (1 kHz, 50 W, 8Ω)Frequency responseCD/DVD ...................................... 20 Hz ~ 70 kHz, +0 dB, –3.0 dBSignal to noise ratio (IHF’66)CD/DVD, AUX, TAPE, VIDEO1, VIDEO2 ............................ 95 dBInput sensitivity / impedanceCD/DVD ................................................................ 550 mV / 47 kΩDVD/6CH INPUT .................................................. 550 mV / 47 kΩOutput level / impedanceTAPE REC ............................................................... 550 mV / 1 kΩTone controlBASS ................................................................ ±10 dB (at 100 Hz)TREBLE ............................................................ ±10 dB (at 10 kHz)Loudness controlVOLUME at -30dB level ................................... +8 dB (at 100 Hz)DIGITAL AUDIO sectionSampling frequency ...................... 32 kHz, 44.1 kHz, 48 kHz, 96 kHzInput level / impedance / wave lengthOptical ........................... (–15 dBm ~ –21 dBm), 660 nm ±30 nmCoaxial ................................................................... 0.5 Vp-p / 75 Ω100 watts per channel minimum RMS, both channels driven, at 8Ωfrom 40 Hz to 20 kHz with no more than 0.7% total harmonicdistortion. (FTC)Notes1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).VIDEO sectionVIDEO inputs / outputsVIDEO (composite) ............................................... 1 Vp-p / 75ΩS-VIDEO inputs / outputsS-VIDEO (luminance signal) ................................ 1 Vp-p / 75ΩS-VIDEO (chrominance signal) ..................... 0.286 Vp-p / 75ΩFM tuner sectionTuning frequency range ................................. 87.5 MHz ~ 108.0 MHzUsable sensitivity (MONO)................. 1.3 μV (75Ω)/ 13.2 dBf (75 kHz DEV., SINAD 30 dB)50dB quieting sensitivitySTEREO ..................................................... 28 μV (75Ω)/ 40.2 dBfTotal harmonic distortion (1 kHz)MONO .......................................................... 0.5% (71.2 dBf input)STEREO ....................................................... 0.7% (71.2 dBf input)Signal to noise ratio (1 kHz, 75 kHz DEV.)MONO ........................................................ 75 dB (71.2 dBf input)STEREO ..................................................... 68 dB (71.2 dBf input)Stereo separation (1 kHz) ........................................................... 40 dBSelectivity (±400 kHz) ................................................................. 70 dBFrequency response .................... (30 Hz ~ 15kHz), +0.5 dB, –3.0 dBAM tuner sectionTuning frequency range10 kHz step .................................................. 530 kHz ~ 1,700 kHzUsable sensitivity (30% mod., S/N 20 dB) ........ 16 μV / (600 μV/m)Signal to noise ratio (30% mod. 1 mV input) ........................... 50 dBGENERALPower consumption .................................................................... 2.2 AAC outletSWITCHED ......................................... (total 150 W, 1.25 A max.)Dimensions .................................................... W : . 440 mm (17-5/16")H : 143 mm (5-5/8")D : 303 mm (11-15/16")Weight (Net) ............................................................... 8.7 kg (19.18 lb)

/ 40

Related manuals for Kenwood VR-716