24 ENAmbience effects DVD 6-channel modeUsing a DVD player or the like equipped with six (5.1) output channelsand the receiver, you can enjoy multi-channel encoded DVD sourcematerial in all its splendor. Since the source signals are digital andeach channel is input independently, the resulting sound quality,sense of spaciousness, and dynamic range are superb.The indication “LFE” appears in the display during DVD 6-channelmode selection. £DSP modeThe DSP mode lets you add the atmosphere of a live concert or hall toalmost any type of program source. These modes are particularly effectivewhen used with stereo program sources, like CD, television, and FM radio.You might enjoy trying the ARENA, JAZZ CLUB, THEATER, STADIUM orDISCO mode the next time you watch a concert or sporting event!What's DSP?DSP stands for Digital Signal Processor.The way a sound is heard in an actual environment depends on avariety of different factors. One of the most important is reverberation(the act of decaying elements of sound echoing in various places).The DSP modes produce the feeling of presence by using the DSP tocreate reverberation, without spoiling the sound quality of the originalsignal.DTS modeThe DTS multi-channel audio format is available on CD, LD and DVDsoftware. DTS is a strictly digital format and cannot be decoded insidemost CD, LD or DVD players. For this reason, if you attempt to listento DTS encoded software through the analog output of your new CD,LD or DVD player, you will experience digital noise in most cases. Thisnoise can be quite loud if the analog output is connected directly to ahigh power amplification system. Proper measures for playing thedigital output as described below should be taken to avoid thissituation. To enjoy DTS Digital Surround playback, an external 5.1channel DTS Digital Surround decoder system or an amplifier with abuilt-in DTS Digital Surround decoder must be connected to the digitaloutput (S/P DIF, AES/EBU or TosLink) of a CD, LD or DVD player.All models are incorporated with the DTS decoder.DTS has a .1 or LFE channel.The indication “LFE” appears in the display when a signal is beinginput for this channel. £