Kenwood VR-8070 Instruction Manual

Also see for VR-8070: Service manual

12 ENENGLISHCOAXIAL OPTICAL OPTICALVIDEO 3OPTICALMONITORCD/DVDDIGITAL IN DIGITAL OUTVIDEO2DVD/6CHDigital connectionsThe digital in jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable of outputting DTS, Dolby Digital, or standard PCM (CD)format digital signals.If you have connected any digital components to the receiver, be sure to read the “Input mode settings” section carefully. 8COAXIALDIGITALOUT(AUDIO)DOLBY DIGITAL RFOUT (AUDIO)OPTICAL DIGITALIN (AUDIO)LD PlayerPCM OUTSetting up the systemRF digital demodulator(Commercially available)MD RecorderOpticalfiber cableComponent with DTS,Dolby Digital, or PCMCOAXIAL DIGITAL OUTConnect the video signal and analogaudio signals to the VIDEO 3 jacks.(See “Connecting video components”.)!To connect an LD player with a DIGITAL RF OUT, connect the LD player to a RF digital demodulator (commercially available).Next, connect the DIGITAL OUT jacks of the demodulator to the DIGITAL IN jacks of the receiver.Connect the video signal and analog audio signals to the VIDEO 2 or VIDEO 3 jacks. (See “Connecting video components”.)Component with DTS,Dolby Digital, or PCMCOAXIAL DIGITAL OUTConnect the video signal and analogaudio signals to the VIDEO 2 jacks.(See “Connecting video components”.)!Optical fibercableCD or DVD PlayerOptical fiber cableOPTICAL DIGITALOUT (AUDIO)COAXIAL DIGITALOUT (AUDIO)OPTICAL DIGITALOUT (AUDIO)