Kenwood VR-8070 Instruction Manual

Also see for VR-8070: Service manual

19 ENENGLISHSetting up the systemConnecting to the AV AUX jacksThe AV AUX jacks are convenient for connection of video componentssuch as a camcorder or a video game.• To select the source connected to the AV AUX jacks press AVAUX key. ¢• When you connect the audio source such as the MD player, youdo not need to connect the video cable.• When you connect the unit and the component with the SVIDEO cord, you can enjoy better picture quality.S VIDEO VIDEO L-AUDIO-RAV AUXCamcorder, otherVCR, video game orportable MD PlayerS VIDEO OUTS VIDEO cordVIDEO OUTAUDIO OUTFM75GNDAMANTENNAConnecting the antennasThe broadcast reception cannot be made unless the antennas areconnected. Connect the antennas correctly as instructed below.AM loop antennaPlace the supplied loop antenna as far as possible from the receiver, TVset, speaker cords and power cord, and adjust the direction for bestreception.AM antenna terminal connections1 Push lever. 2 Insert cord. 3 Release lever.FM indoor antennaThe supplied indoor antenna is for temporary use only. For stable signalreception we recommend using an outdoor antenna. Disconnect theindoor antenna when you connect one outdoors.FM antenna terminal connectionsInsert connector.FM outdoor antennaLead the 75Ω coaxial cable connected to the FM outdoor antenna into theroom and connect it to the FM 75Ω terminal.AM loop antennaFM indoor antennaUse an antennaadaptor(Commerciallyavailable)Attach to the standFM outdoor antenna