Kenwood VR-8070 Instruction Manual

Also see for VR-8070: Service manual

25 ENENGLISHAdjusting the soundAdjusting the TONEYou can adjust the sound quality when the receiver is in the PCM stereomode, analog stereo mode and when “THX OFF”.1 For the remote control, press and hold the TUNER key for morethan 3 seconds to switch to receiver mode.2 Press the TONE key to select the TONE mode.3 Use the MULTI CONTROL knob or Multi (%/fi) keys to selectTONE ON/OFF.LSL S SB SRC RSP MUTE OPTICAL 6CH INPUTCOAXIAL ANALOG 96kHzfsCINEMA EQ.ACTIVE EQ.DSP MODEDTS.MATRIXDISCRETEDOLBY DIGITALPRO LOGICSTEREOLOUDNESSNEO:6CSIIA B CLIPAUTO DETECT THXAUTORDSRTYMEMOSTEREOTUNEDSurround EXLFE4 When in TONE ON selection, press the TONE key for the followingdisplays.BASS : Select this to adjust the low frequency range.TREBLE : Select this to adjust the high frequency range.5 Use the MULTI CONTROL knob or Multi (%/fi) keys to adjust thesound quality.LSL S SB SRC RSP MUTE OPTICAL 6CH INPUTCOAXIAL ANALOG 96kHzfsCINEMA EQ.ACTIVE EQ.DSP MODEDTS.MATRIXDISCRETEDOLBY DIGITALPRO LOGICSTEREOLOUDNESSNEO:6CSIIA B CLIPAUTO DETECT THXAUTORDSRTYMEMOSTEREOTUNEDSurround EXLFE• The bass and treble levels are adjustable from -10 to +10 in 2 stepincrements.• The adjustment item is displayed for approximately 20 seconds.• This function is available only for speakers connected to FRONT Aterminals.Once-touch low frequency emphasis (BASS BOOST)(remote control only)You can adjust the sound quality when the receiver is in the PCM stereomode, analog stereo mode and when “THX OFF”.Press the Bass Boost key.• Press the key once to select the maximum (+10) low frequencyemphasis setting.• This key does not function when the receiver is in the sound qualityor ambience effects adjustment mode.• This function is available only for speakers connected to FRONT Aterminals.Switching back to the previous settingPress the Bass Boost key again.Adjusting the LOUDNESS mode (remote control only)You can adjust the Loudness function which controls the low volumesettings to maintain the music's richness. The adjustment can be madewhen the receiver is in the PCM stereo mode, analog stereo mode andwhen “THX OFF”.Press the Loudness key to turn the LOUDNESS setting ON.• This function is available only for speakers connected to FRONT Aterminals.To cancelPress the Loudness key again so that the “LOUDNESS” indicatorgoes off.Muting the soundThe MUTE key lets you mute the sound of the speakers.Press the MUTE key.BlinksLSL S SB SRC RMUTE OPTICAL 6CH INPUTCOAXIAL ANALOG 96kHzfsCINACDSA B CLIPAUTO DETECTLFESPTo cancelPress the MUTE key again so that the “MUTE” indicator goes off.• MUTE ON can also be deactivated by turning the VOLUMECONTROL knob or pressing VOL +/– keys.ACTIVE EQ modeYou can enjoy a more impressive sound effect when ACTIVE EQ isturned ON.Press the ACTIVE EQ key for the following selections;1 ACTIVE EQ MUSIC : Effective when listening to music.(The ACTIVE EQ indicator lights up.)2 ACTIVE EQ CINEMA : Effective when watching a movie.(The ACTIVE EQ indicator lights up.)3 ACTIVE EQ TV : Effective when watching TV.(The ACTIVE EQ indicator lights up.)4 ACTIVE EQ OFF : The ACTIVE EQ function is turned OFF.(The ACTIVE EQ indicator goes off.)• “ACTIVE EQ” will scroll from right to left.• ACTIVE EQ function will not be available when in REC MODE, orwhen searching or presetting radio stations.LoudnessBass BoostTONEVOLUMECONTROLMUTESPEAKERSSPEAKER EQ ACTIVE EQPHONESMULTI CONTROLVOL /POWER RCVRSpeaker EQActive EQMute(Multi %/ fi)TUNERNormal playback