XD-8550/XD-6000 (En/T)2 7Preparation sectionBasic sectionApplication sectionKnowledge sections2 3Selection of DOLBY NR (Noise Reduction)To stop playbackSelection of reverse mode.To wind tape at high speedTo fast wind in direction \The Dolby NR system minimizes the hiss noise heard whenplaying tape. When playing a tape prerecorded with DolbyNR ON, be sure to set the DOLBY NR ON for playback.Let's put out some soundTo fast wind in direction |÷ Press the 7 key to stop fast winding.Each press switches the modes as follows.1 “[” ... Both sides are played back (recorded), andthen the tape stops (When 2 key is pressed,only one side is played back (recorded).2 “”” .. Both sides are played back endlessly.(The tape stops after recording onto bothsides.)3 ““” .. Only one side is played back (recorded),and then the tape stops.÷ Select the Dolby NR mode according to the recording condition ofthe tape.Transport direction÷ Normal (TYPE ), high (TYPE ), or metal (TYPE ) tape selection isset automatically.÷ Remove tape slack before loading.÷ Close the door securely.÷ Do not take out the cassette tape until the tape transport hasstopped completely.Transport directionEach press switches the modes as follows.1 “DOLBY NR indicator” ON........ DOLBY NR is used.2 “DOLBY NR indicator” OFF........ DOLBY NR is not used.1 ¡Press while inthe stop modeREV.MODERO p π7REVDOLBY NRTransport direction indicatorsThe 2 and 3 indicators indicate the current direction in whichthe tape advances when playback or recording is started auto-matically by the easy operation function, etc. This direction isthe direction stored in memory when the tape was last stopped.(To switch the tape transport direction, press the play key cor-responding to the desired direction then press the stop (7) key.)LightsLightsDolby noise reduction manufactured under license from Dolby Labo-ratories Licensing Corporation.“DOLBY” and the double-D symbol are trademarks of Dolby Labora-tories Licensing Corporation.