Kenwood XD-6000 Instruction Manual

Also see for XD-6000: Instruction manual Instruction manual

Contents

Kenwood XD-6000 Instruction Manual Manual pdf 58 page image

XD-8550/XD-6000 (En/T)5 8Preparation sectionBasic sectionApplication sectionKnowledge sections31Start edit recording.Select the disc.2Go to step 3 before playback starts.Recording preparations are required. ¤¤¤¤¤For the reverse mode, select “”” ,“[”(two-way recording).This function allows to record CD sound simultaneouslyon a tape and MD. All tracks on a CD can be recorded in thesame order as they are recorded on the CD.When recording sound from the MD recorder to a cassettedeck, be sure to read the instruction manual of the optionalMD recorder (DM-F70).Twin recording (For XD-8550)Convenient CD recordingDISC SKIPTWIN REC÷ The recording level and bias will be adjusted automatically in approx. 60seconds (variable depending on CD contents), after which recordingstarts.÷ The CD tracks are recorded in the order they are recorded on the CD.÷ The tape and CD stop automatically when recording has completed.PGM MEMO EDIT RDS EON TA NEWS INFO. TP PTY TOTAL SPACEAUTOTUNEDDISC ALLSTEREO kHzMHzMUTE12PROG. N.B.D 1 * ) 1 * * ) ): 21 2 3 4 511 12 13 14 1516 17 18 19 206 7 8 9 10MAXSLEEP O.T.T. ECHO P.B.C. EQ.ON MANU.Press so that the “PGM” indicator goes off.Selected disc No.P.MODE PGM MEMO EDIT RDS EON TA NEWAUTOTUNEDDISC ALLSTEREOC D *MAXSLEEP O.T.T.Should be OFF.CCRS REC / ARM1. When the TWIN REC key is pressed during playback of CD, the playback stops and the CCRS setting (preparing edited recording) starts.2. The automatic recording level setting in the edit recording is based on a suitable section for recording level setting in the loaded CD.3. If the deck is set for one-side recording (“), the processing at the tape end is applied only on side A.To end recording in the middle÷ Both the cassette deck and CD player stop.7÷ The recording input of the MD recorder is set automatically to “DIGITAL”.During recording: X-H5 Blinks LightsNotesNotesFor XD-8550