Kenwood XD-6000 Instruction Manual

Also see for XD-6000: Instruction manual Instruction manual

Contents

Kenwood XD-6000 Instruction Manual Manual pdf 41 page image

XD-8550/XD-6000 (En/T)4 1Preparation sectionBasic sectionApplication sectionKnowledge sectionsTo stop playbackTo check the programmed tracksPGM MEMO EDIT RDS EON TA NEWS INFO. TP PTY TOTAL SPACEAUTOTUNEDDISC ALLSTEREO kHzMHzMUTE12PROG. N.B.D 2 * ) 3 * P - ): 11 2 3 4 511 12 13 14 156 7 8 9 10MAX7CHECKTo add a track to the program1 Select the disc.3 Establish the selection.PTYSEARCH2 315 648 970 +10P.MODEPlayback of CDFor XD-8550Remote control unit only Blinks.÷ Each time the key is pressed, the program No. (P-NO) and the disc No.are displayed.÷ The previous display resumes in a few seconds.2 Select the track.DISC SKIPGo to step 3 within 8 seconds.÷ To select tracks from more than one CD,repeat steps 1 to 3 for each track.÷ The added track number is added to the endof the existing program.To clear tracks from the programCLEARP.MODETo clear all track.Press to clear tracks from the end.÷ Each time the key is pressed, the last track inthe program is cleared.÷ The track being played cannot be cleared.÷ The entire program contents also are erasedwhen the disc tray is opened.Disc No.Track No.Program No.Auto space function (Remote control unit only)When the SPACE key is pressed during programming of tracks,a non-recorded space of a few seconds will be created betweentracks. By recording tracks with these spaces on tape, the searchand repeat play operations of tape using the DPSS function(which works by searching the non-recorded spaces) can beperformed reliably.÷ Even when the performances of two tracks are continuous (whichoccurs with classical or live recording music), the spaces will becreated if they have different track Nos.÷ To cancel the auto space function, press the P.MODE key or theSPACE key again.Go to step2 within 8seconds. Remote controlunit only