XD-951/A900/A700 (En)10Preparation sectionBasic sectionApplication sectionKnowledge sectionsConnection of the surround speakersCenter speakerSurround speakerSurround speaker system (supplied)Do not plug the power cord into the power outlet until allof the required connections have been made.Main UnitSpeaker Unit1 2 31 2 3* Optional in this mode.Dolby Pro LogicDolby Pro Logic is a specially encoded 2 channel surround for-mat designed to provide theater-like surround sound from DolbySurround encoded sources (such as video and Laserdisc soft-ware marked ). This unit is equipped with aDolby Surround decoder to let you enjoy the wide variety ofcurrently available Dolby Surround home video software.* Optional in this mode.Dolby 3 StereoDolby 3 Stereo is available for systems that do not set surroundspeakers. When in the Dolby 3 Stereo mode the surround infor-mation is redirected to the front left and right speakers. Thismode is designed for use with Dolby Surround program sources,but can also improve sound field unity for programs that arenot Dolby Surround edcoded. Dialog positioning and sound im-age definition, however, may not be as accurate when used withprograms that are not Dolby Surround edcoded.Subwoofer*Center speakerFront SpeakerSurround speakers (monaural signal)How to use the speaker stabilizer (cushions)When the surround speaker system installation is unstable dueto the floor condition, apply the provided stabilizer (cushions)on four positions on the bottom of each speaker. (Except forCRS-N551)Recommended speaker installationIt is recommended that the surround speakers are installedstraight to the left and right of the listening position or slightlybehind, at a height of about 1 meter higher than the listener’sears. Each surround speaker should be installed so that thelonger sides are horizontal.Hanging on a wallThe surround speakers can be hung on a wall.When hanging the surround speakers, select a rigid and hardplace on the wall which can withstand the weight of the speak-ers.1. Attach the provided mounting hardware onto the rear panel of eachspeaker using the provided screw. (Except for CRS-N551)2. Install a screw, which is commercially available, with sufficientstrength on the wall. When screwing in, leave the head and upperstem of the screw projected by 7 to 9 mm from the wall surface.3. Mount each speaker by hooking up the hole of the speaker rear panelon the screw attached to the wall.4. Check that the speakers are firmly mounted.Surround speakerCenter speakerFront SpeakerSubwoofer*System connection (XD-951/XD-A900/XD-A700)− + − +RSURROUNDSPEAKERS(12-16Ω)L+ –GNDLRLRSUB WOOFERSPEAKERS(12-16Ω)FRONTSPAKERS(6-16Ω)AUXOUTPUTANTENNAFM300ΩAUXINPUTAUX INPUTLEVELMIN. MAX.LRLR+ –FM75ΩAMRSURROUNDSPEAKERSL+ – RSURROUNDSPEAKERS(12-16Ω)L+ –− +CENTERSPEAKER(6-16Ω)CENTERSPEAKER(6-16Ω)