Kenwood XD-951 Instruction Manual

Also see for XD-951: Instruction manual Instruction manual

Contents

Kenwood XD-951 Instruction Manual Manual pdf 43 page image

XD-951/A900/A700 (En)43Preparation sectionBasic sectionApplication sectionKnowledge sectionsPlayback of CD.Recording preparations are required. •••••(Steps 1to 3)1When the equalizer or SRS 3D is applied to thesound, the sound with the applied effect can be re-corded. iConvenient CD recordingLightsStart recording.4Press the DUBBING key.Select “CD ONE TRACK RECORD”.32÷ Playback restarts from the beginning of the track being played andrecording starts at the same time.631 2301 20DC31 230120DCDUBBINGMULTICONTROLENTER÷ Both the cassette deck and CD player stop.NETRAODCTo end recording in the middleWhen recording has been completed, a non-recorded portion of4 seconds will be produced and the cassette deck part will stop.The CD player will enter temporary stop condition.To record a different track, repeat the steps 1 to 4.7CD ONE TRACK RECORDCD RECORDCD EDITCD PGM RECORDRecording only desired titles (CD ONE TRACK RECORD)At the time of CD playback, any desired title can be se-lected immediately for recording.Select a mode other than random play.Press the ENTER key.| Scrolled display(CD ONE TRACK RECORD)In case the key is pressed with track No.3When Dolby Pro Logic, Dolby 3 Stereo or DSP mode is selected,cancel it by pressing the STEREO key of the remote control unit.