Kenwood XD-951 Instruction Manual

Also see for XD-951: Instruction manual Instruction manual

Contents

Kenwood XD-951 Instruction Manual Manual pdf 58 page image

XD-951/A900/A700 (En)58Preparation sectionApplication sectionKnowledge sectionsAdjust the clock before setting the timer.Adjust the listening volume.Make preparations for the play (recording).÷ When the timer function is used for timer recording of an input source,the speakers do not output the audio even after the unit is turned on bythe timer.÷ To listen to CDInsert a disc.(Program playback is notpossible.)÷ To listen to tapeSet a tape into deck B.÷ Playing the auxiliary inputsourceMake timer setting ofthe component con-nected to the AUX jacks.÷ For recordingMake prepara-tions for record-ing. •÷ To listen to radioThe station should bepreset prior to theabove. ¶Select the disc to be played(1, 2 or 3).÷ Timer reservation is possible for the two types PROG.1 and PROG. 2at the same time.÷ Please make reservations with an interval of at least one minute, so thatthe operation times of PROG. 1 and PROG. 2 do not overlap.Timer programmingTwo 24-hour timer systems (PROG.1, PROG.2) (which can be used every day) are available.In each of PROG.1 and PROG.2, the timer data including the operating period and played contents can be set and selected tobe activated or not as required.12Adjust the clock before setting the timer. YThe B deck has priority atthe time of timer playback.Timer operationSelect a program No. and press the SET key.4÷ The selected program No. lights.÷ If a program No. under which a timer program has already been reserved, it is replaced by the new timer program.÷ If you made a mistake during timer setting:Select “RETURN” in the time setting or selection item and press theSET or ENTER key. (This makes it possible to the previous step so thecurrent step can be restarted.)SLEEPTIME SETO.T.T.PROG. ON/OFFPROG.1 ...... Program 1PROG.2 ...... Program 2AUTO POWER SAVEPress the TIMER key.3Enter the ON time.5 ÷ After entering the figure of “hour” with the procedure in 1 and 2,enter the figure of “minute” using the same procedure.1The timeis advanced.2The timeis returned.AMULTICONTROLSETVOLUMECONTROLUPDOWNTIMERMULTICONTROLSET1GORPPROG.1AM7O0