Kenwood XD-951 Instruction Manual

Also see for XD-951: Instruction manual Instruction manual

Contents

Kenwood XD-951 Instruction Manual Manual pdf 51 page image

XD-951/A900/A700 (En)51Preparation sectionBasic sectionApplication sectionKnowledge sectionsYPROBLOD11 Press the MENU key.2 Select the LISTEN MODE.(Go to next step within 15 sec.)3 Select the DOLBY PRO LOGIC mode.(Go to next step within 15 sec.)4 Select the center speaker mode .(Go to next step within 15 sec.)5 Select the delay time.NORMAL ............. When the center speaker is compact-sizedspeaker.WIDEBAND ......... When the center speaker is medium- orlarge-sized speaker.PHANTOM ........... When the center speaker is not used.RETURN ...............Returns to step 3.When video (LD) software carrying markis played, this mode provides the Dolby Surround effect,similar to movie theaters.DOLBY PRO LOGIC surround adjustmentManufactured under license from Dolby Laboratories Licensing Cor-poration. “DOLBY”, the double-D symbol and “PRO LOGIC” aretrademarks of Dolby Laboratories Licensing Corporation.÷ Be sure to adjust from your listening position.÷ When the number of displayed characters exceeds 10, the charactersare first scrolled then stop.÷ To abort setting in the middle, press the MENU key again.÷ If you cannot tell whether your center speaker is compact or medium-size, try two modes and select according to your liking.Set the DOLBY PRO LOGIC mode.Effective Sound AdjustmentCTMODELES| Scrolled display (SELECT MODE)CD PGM (Displayed only when the CD input is selected)DUBBING (Displayed only when a tape is in deck B)SOUNDDISPLAYTIMERLISTEN MODE (Scrolls then stops.)MODESetting using the remote control unit:MENUDOLBY PRO LOGICDOLBY 3 STEREOSTEREODSP| Scrolled display (DOLBY PRO LOGIC)15 mS ...... When the listening position is closer to the frontspeakers20 mS ...... When the listening position is located betweenthe front and surround speakers30 mS ...... When the listening position is closer to the sur-round speakersRETURN ... Returns to step 4.÷ To abort setting in the middle, press the LISTEN MODE key again.÷ When the setting completes, all of the set contents are displayed byscrolling.Delay timeThis refers to the difference in timing of the sound output fromthe surround speakers with respect to that output from the frontspeakers. The delay time setting consists of adjusting this dif-ference in time.SET1 2SET1 2ENTER1 2SET1 2If you are operating the main unit, press the LISTEN MODE keythen select by turning the MULTI CONTROL jog dial in place of press-ing the “@ #” key of the remote control unit.