Lathem FaceIN FR650 User Manual

Also see for FaceIN FR650: User guide

Contents

Lathem FaceIN FR650 User Manual Manual pdf 16 page image

12 • Terminal SetupFR700 Model - Press 6 or select the Set Date and Time menuand press OK.• Press 3 or select the Set Time Format menu and press OK.• Press 1 for 12 hour (AM/PM) or 2 for 24 hour (0-23).• After a few seconds the system will return to the “Set Dateand Time” screen. Continue making changes to theterminals system settings or press ESC, ESC and ESCagain to return to the normal time/date screen.How do I change the displays date format?The date format selection will determine how the date will show onthe terminal display.• At the FaceIN terminal press the MENU key. Administratorverification is required.• The administrator should present and position the face for afacial scan. The Functions Menu will display upon asuccessful verification.• Press 4 or select the System Setting menu and press OK.FR650 Model - Press 5 or select the Set Date and Time menuand press OK.FR700 Model - Press 6 or select the Set Date and Time menuand press OK.• Press 4 or select the Set Date Format menu and press OK.• Press 1 for YYYY-MM-DD (2011-03-01) or 2 for MM-DD-YYYY (03-02-2011). Note: March 01, 2011 was used in theexample above.• After a few seconds the system will return to the “Set Dateand Time” screen. Continue making changes to theterminals system settings or press ESC, ESC and ESCagain to return to the normal time/date screen.How do I activate the tamper alarm on theterminal?The terminal has a feature where if it were removed from the wallmounting-plate an alarm can sound. The alarm is turned off bydefault. (FR700 only)