Lathem FaceIN FR650 User Manual

Also see for FaceIN FR650: User guide

Contents

Lathem FaceIN FR650 User Manual Manual pdf 9 page image

Install the FaceIN Terminal • 5Install the FaceIN TerminalStep 1: Select a site to install your FaceIN terminal that will beconvenient to employees clocking in and out. When deciding wherethe terminal will be installed, keep in mind that an 115vAC poweroutlet should be within 6 feet of the mounting location as well as aconnection to the network (LAN).Note about Direct Sunlight - It is not recommended to have theterminal mounted in a location where it is exposed to direct sunlight.This could be troublesome during the registration process.Step 2: After selecting the appropriate installation site, use theterminal to determine the appropriate height. Have the shortestemployee stand in front of the terminal. Hold the terminal on the wallso that this employee can comfortably center their face in the LCDdisplay window. Mark the height of the terminal on the wall. Note:Taller employees can easily adjust their stance to center their face inthe LCD display window.Install the mounting-plate to the wall using the supplied screws. Forsheetrock walls, drill a 3/16” diameter hole through each of the fourscrew locations; each approx 1-1/2” deep. Install the plastic“anchors” included in the mounting screw packet.