AUDIO OUTCOAXIALANT.AUDIO OUTCOAXIAL10 Optional Connections• You cannot use a Mini-Disc orDigital Audio Tape deck to copyDolby Digital 5.1 channel sur-round sound Discs.• Discs recorded in Dolby Digitalshould show this on the Disc orcase. If the Disc is not recordedin Dolby Digital 5.1 channel sur-round sound, you will not hearmulti-channel sound even if youuse the Digital Stereo hookup.Helpful HintsDigital Stereo HookupsYou can connect the TV/VCR/DVD to a Stereothat has a Digital Coaxial In jack. Use thishookup if you want to hear the TV/VCR/DVDsound through the Stereo instead. Use theseconnections for a Dolby Digital-compatibleStereo or for a Receiver that has a Mini-Disc orDigital Audio Tape deck.1 Connect the antenna/Cable TVsignal. Details are on pages eight-nine.2 Connect a digital audio coaxialcable (not supplied) to the AUDIOOUT COAXIAL jack on theTV/VCR/DVD.Also connect the cable to theStereo’s COAXIAL DIGITALAUDIO IN jack.3 If the Stereo is Dolby Digital-com-patible, set DOLBY DIGITAL toON. If the Stereo is not Dolby Digital-compatible or if you connected to aMini-Disc or Digital Audio Tape Deck,set DOLBY DIGITAL to OFF. Details areon page 72.An incorrect setting causes noise distor-tion and damages speakers.To see if your Stereo has Dolby Digital,look for a Dolby Digital logo on yourStereo. Or, refer to the Stereo owner’smanual.To AUDIO OUTCOAXIAL jackon TV/VCR/DVDTo Stereo’s COAXIALDIGITAL AUDIO IN jackT0006UG_6006UG_EN_1.qx3 04.5.12 10:09 AM Page 10
