• If you enter the wrong code in theCONFIRM CODE space, repeatstep 5. Enter the same new codeexactly in the CONFIRM CODEspace.• If you unplug the power cord or ifthe power fails, the default codewill be active again (0000).Change your access code again asnecessary.Helpful HintsSetting V-Chip (cont’d) 47Changing the Access CodeAlthough the default code 0000 is supplied with theTV/VCR/DVD, you can set your own access code.1 Press SETUP.2 Press ▲ or ▼ to select V-CHIP SET UP.Then, press ENTER.3 Press the Number buttons to enter the oldaccess code. When doing this for the first time, use0000. Four Xs will appear instead of the code to pro-tect its identity.4 Press ▲ or ▼ to select CHANGE CODE.Then, press ENTER.5 Press the Number buttons to enter your pre-ferred access code in the NEW CODE space.Then, enter the same code in the CONFIRMCODE space. Again, Xs will appear instead of thecode numbers.The access code must have exactly fourdigits.The V-CHIP SET UP screen will reappear.6 Press SETUP to save your settings and removethe menus.NEW CODECONFIRM CODEX X X X– – – –– V-CHIP SET UP –TV RATINGMPAA RATINGCHANGE CODEBACCESS CODE– – – –PLAYSTOPENTERRECORD DISCMENURETURNTITLESETUPA-BREPEATSEARCH MODECLEARMODE ANGLESUBTITLEAUDIODISPLAYSPEED C.RESETSTANDBY-ON PICTURE SELECTSLEEPCH.VOL.MUTEZOOM1 2 34 5 67 8 90 +10+100REPEAT2,41,63,5T0006UG_6006UG_EN_1.qx3 04.5.12 10:09 AM Page 47
