Adjusting settings while watching a showPress A to display the Options menu (except when you are viewingthe program information banner). Press the Up and Down arrowsto highlight an option, and then press the Left and Right arrowsto change the setting. The topic Adjusting TV settings L p. 35explains each of the settings in detail.Pausing Live TVLive TV Pause gives your Roku TV the ability to pause, play, fastforward, and rewind digital Antenna TV. You can pause AntennaTV for up to 90 minutes.RequirementsTo use this feature, you need to:1 Connect your TV to the Internet. If you didn’t connect duringGuided Setup, see What if I didn’t connect my TV? L p. 22.2 Provide your own dedicated USB drive with the followingminimum specifications.● 16 GB● 15 Mbps read/write speed● USB 2.0 compliantA USB flash drive (thumb drive) meeting the minimumrequirements is highly recommended. Note that using a largerdrive does not extend the 90 minute pause time.IMPORTANT: After warning you and giving you a chance tocancel Live TV Pause setup, all existing content on your USBdrive is erased when you enable this feature.3 Connect your USB drive to the TV’s USB port.IMPORTANT : Some TV models have more than one USB port.You can connect your Live TV Pause USB drive to any port,but make sure that nothing is connected to other USB portswhile enabling Live TV Pause. Reconnect other USB devicesafter you have finished enabling Live TV Pause.4 Enable Live TV Pause, as explained in the following topic.Enabling Live TV PauseYou can start setting up Live TV Pause in any of the following ways:● Go to Settings > TV inputs > Antenna TV > Live TV Pause, andthen select Enable.● After completing a channel scan, select Set up Live TV Pausefrom the available options.● Press Play/Pause on the Roku remote while watching a digitalAntenna TV channel.● Highlight the Antenna TV tile on the Home screen, press A onthe remote, and then select Enable Live TV Pause.After starting setup of Live TV Pause in any of these ways, the TVprompts you through the steps needed to enable this feature.Setup takes only a few moments.Note(s)● Use of a USB hub is not supported.Using Live TV PauseIf you have used the Roku remote to watch streaming channels,using Live TV Pause should be very familiar to you.● While watching a digital Antenna TV channel, press Play/Pauseto pause or play the content. After the TV program has beenpaused for 90 minutes, the TV resumes playing.● After watching a channel for a while, press Rewind to jump backup to the point where you first started watching the channel, upto 90 minutes.● After pausing or rewinding, press Fast forward to jump ahead upto the point where you are once again watching the live TVprogram.● Press Fast forward or Rewind repeatedly to cycle through 1x, 2x,and 3x skip speeds. Press Instant replayC to play back the lastseveral seconds of the program.● When the program is paused, press the Left and Right arrowsto move forward and backward through the programapproximately 10 seconds per press. Small frames appearacross the screen to identify your location in the program.Note(s)● If the C button is not available on your remote, you can use the Rokumobile app. For more information, see Getting and using the Roku mobileapp L p. 60.Whenever you use any of the Live TV Pause features, the TVmomentarily displays a progress bar:1 Time at current playback position.2 Current playback position3 Extent of pause time, representing the amount of time thischannel has been buffered, up to 90 minutes.4 90 minute mark, representing the maximum extent of pausetime.5 Current time.The progress bar also displays tick marks at each half hour point,to help you locate the boundaries where one show ends and a newone begins.29 .English