Makita DCU180 Instruction Manual

Also see for DCU180: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

14 ENGLISHPress the check button to indicate the remaining batterycapacities. The battery indicators correspond to each battery.Battery indicator statusRemaining batterycapacityOn Off50% - 100%20% - 50%0% - 20%Battery notinstalledCAUTION: When the battery capacity becomeslow, a short beep sound is emitted. If you continue tooperate the machine at low battery capacity, a long beepsound is emitted and the machine automatically stops.When you hear the short beep sound, pull the brakelever and lock the brake, and then switch the battery car-tridge to a charged one or charge the battery cartridge.When the remaining battery capacity runs out, the machinesuddenly stops automatically and this may cause an injury.NOTE: If you continue to pull the switch trigger evenif you hear the short beep sound, the machine stopsautomatically. After the machine stops automatically, thebeep sound continues and the support brake (electricbrake) is enabled. To cancel the beep sound and releasethe support brake, pull the brake lever and release theswitch trigger. Do not push the machine forcibly withoutreleasing the support brake. After releasing the supportbrake, you can tell which battery protection system isworking by checking the battery indicator status.41 2 356Ź 1. Lighting 2. Blinking 3. Turned off 4. Overheat protection5. Overdischarge protection 6. Overload protectionCAUTION: If the beep sound is emitted whileoperating on slopes or the machine stops automat-ically on slopes, move the machine to a safe place,lock the brake, and then switch the battery cartridgeto a charged one or charge the battery cartridge.If the load is large, and the beep sound is emit-ted while operating on slopes or the machinestops automatically on slopes, do not move themachine forcibly. Lock the brake, pay attention tosafety and switch the battery cartridge to a chargedone, and then move the machine to a safe place.Reduce the load before operating the machine again.NOTE: You can check the remaining battery capacityeven if the lock key is not inserted.Indicating the remaining batterycapacityOnly for battery cartridges with the indicator12Ź 1. Indicator lamps 2. Check buttonPress the check button on the battery cartridge to indi-cate the remaining battery capacity. The indicator lampslight up for a few seconds.Indicator lamps RemainingcapacityLighted Off Blinking75% to 100%50% to 75%25% to 50%0% to 25%Charge thebattery.The batterymay havemalfunctioned.NOTE: Depending on the conditions of use and theambient temperature, the indication may differ slightlyfrom the actual capacity.