Makita DCU180 Instruction Manual

Also see for DCU180: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

15 ENGLISHControl panel12 3Ź 1. Power button 2. Forward/reverse button 3. SpeedbuttonTo turn the power on, press the power button for a fewseconds. Press the forward/reverse button to switchbetween the forward mode and reverse mode. Pressthe speed button to switch between low speed and highspeed. When the power is turned on, the forward modeand low speed are set. To turn the power off, press thepower button for a few seconds.NOTE: The forward/reverse button is not availablewhile pulling the switch trigger.NOTE: A short beep sound comes out when operat-ing the machine in reverse.NOTE: The speed button is not available when oper-ating the machine in reverse.Switch and brake actionWARNING: Before installing the battery car-tridge into the machine, always check to see thatthe switch trigger actuates properly and returnsto the "OFF" position when released.To start the machine, pull the switch trigger. To stop themachine, release the switch trigger and pull the brakelever. To lock the brake lever, press the lock buttonwhile pulling the brake lever. To release the lock, pullthe brake lever.1Ź 1. Switch trigger12Ź 1. Lock button 2. Brake leverRear wheel brakeThe rear wheels are equipped with the brakes. Pressthe brake pedals toward the front to lock the brakes. Torelease the brakes, press the brake pedals toward therear.1Ź 1. Pedal