Makita DCU180 Instruction Manual

Also see for DCU180: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

18 ENGLISH1Ź 1. Switch triggerLoading objectsCAUTION: Before loading objects on the machine,make sure that the power is off and the brake lever is locked.CAUTION: If the rear wheels are installed,make sure that the rear wheel brake is lockedbefore loading objects on the machine.CAUTION: Before loading objects on themachine, make sure that the carrier or bucket is locked.CAUTION: Be sure to load objects within thecarrier or bucket. If objects are sticking out of the carrieror bucket, they may fall or collapse if they touch obstacles.CAUTION: Be sure to load objects so thatthey are below eye level. If the load is too high, it isdangerous because the view is obscured. Also, thereis a risk of overturning and injury because the load islikely to be unbalanced.When loading objects on the carrier, secure the objectswith ropes and tie them down to the rope hooks.Dumping objectsCAUTION: Lift the carrier or bucket on latand stable ground. Operation on unstable groundmy cause an accident or injury.You can dump the objects by lifting and tilting the carrieror bucket.1. Stop the machine, and then lock the brakes.NOTICE: It is recommended to block the frontwheel to stabilize the machine.2. Release the lock lever.3. Stand at the side of the machine, hold the handlewith one hand, and then lift and tilt the carrier or bucketby pushing up the carrier frame with the other hand.CAUTION: Hold the handle and carrier frameirmly, and work in a stable posture.CAUTION: Keep the load to a minimum. If theload is large, do not try to lift the carrier. Reducethe load, and then lift the carrier.CAUTION: After dumping the objects, be sureto lock the carrier or bucket.