Makita DCU180 Instruction Manual

Also see for DCU180: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

9 ENGLISH5. Raise the handles, and then insert them into thebase unit.ANOTICE: Do not allow the cords inside area "A"in the igure. Long objects may be entangled with thecords and cause accidents.NOTICE: Do not apply excessive force to thecords when raising and inserting the handles.NOTICE: Be sure to raise the handles with bothhands.6. Open the carrier frame toward the front.1Ź 1. Carrier frame7. Unfold the handles, then insert the long hexagonalbolts into the base unit, and then tighten the nuts withthe wrench included in the package.11Ź 1. Long hexagonal bolt8. Tighten the shoulder bolts from the rear using thewrench included in the package.1Ź 1. Shoulder bolt9. Tighten the short hexagonal bolts from both sidesusing the wrench included in the package to ix thehandles.11Ź 1. Short hexagonal boltNOTICE: Do not tighten the short hexagonalbolts with excessive force. Tighten them withproper force so that the handles are stably ixed.NOTICE: Do not pinch the cords with the bolts.10. Fix the cords with the clamps.