Makita LS0714 Instruction Manual

Also see for LS0714: Instruction manual Instruction manual Instruction manual Parts Breakdown Instruction manual

Contents

11 ENGLISHASSEMBLYWARNING:• Always be sure that the tool is switched off andunplugged before carrying out any work on thetool.Hex wrench storage1 2► 1. Wrench holder 2. Hex wrenchThe hex wrench is stored as shown in the figure. Whenusing the hex wrench, pull it out of the wrench holder.After using the hex wrench, return it to the wrenchholder.Installing or removing saw blade1► 1. Stopper pinWARNING:• Always be sure that the tool is switched off andunplugged before installing or removing theblade.CAUTION:• Use only the Makita hex wrench provided toinstall or remove the blade. Failure to do so mayresult in overtightening or insufficient tighteningof the hex socket bolt. This could cause aninjury.Removing the bladeLock the handle in the raised position by pushing in thestopper pin.To remove the blade, use the hex wrench to loosen thehex socket bolt holding the center cover by turning itcounterclockwise. Raise the blade guard and centercover.1234► 1. Center cover 2. Hex socket bolt 3. Hex wrench4. Safety coverPress the shaft lock to lock the spindle and use the hexwrench to loosen the hex socket bolt clockwise. Thenremove the hex socket bolt, outer flange and blade.12345► 1. Shaft lock 2. Arrow 3. Blade case 4. Hex wrench5. Hex socket boltInstalling the bladeTo install the blade, mount it carefully onto the spindle,making sure that the direction of the arrow on the sur-face of the blade matches the direction of the arrow onthe blade case. Install the outer flange and hex socketbolt, and then use the hex wrench to tighten the hexsocket bolt (left-handed) securely counterclockwisewhile pressing the shaft lock.

/ 72

Related manuals for Makita LS0714

Makita LS0714 Instruction Manual

This manual is suitable for:

LS0714

manualsdatabase

Your AI-powered manual search engine