NAD T585 Owner's Manual

Also see for T 585: Catalog Owner's manual Specifications Service manual Technical bulletin

NAD T585 Owner's Manual Manual pdf 14 page image

xover (croSSover) frequencYSet the frequency level where bass redirection starts. Frequencies belowthe set level are redirected to the subwoofer while those above are notredirected. Crossover frequency can be set from 80Hz up to a maximum of150Hz; it is applicable only to SUBWOOFER.teStSelect ON to test the signal of each speaker. Adjust the volume to matchthe volume of test signals memorized in the system. You can adjust thevolume while operating the test tone - use [ ] buttons to selectVolume or Speaker option then use [ ] buttons to select speaker oradjust volume level. If you adjust the volume while operating the test tone,the test tone will be held paused in the current speaker channel.returnPress to go back to the previous menu screen.maSter volumeAdjust the audio output level of the T 585 from -50dB up to a maximum of0dB.downmixDownmix allows you to enjoy a 5.1 or 7.1 channel media regardless of howmany speakers you have. In Downmix, the analog stereo output could beprocessed into two different types of stereo Downmix.lt/rt: Surround-compatible Downmix known as Left-total/Right-total,also known as Lt/Rt. This is a multi-channel source suitable for DolbyPro Logic II, Dolby Pro Logic IIx, or other matrix decoding. The Lt/RtDownmix sums up all the Surround channels, attenuates them by 3dB and adds them out-of-phase to the Left Front speaker channel andin-phase to the Right Front speaker channel. This allows a home theaterdecoder to produce Front Left, Center, Front Right, Surround Left andSurround Right as well as Surround Back Left and Right channels.Stereo: Stereo Downmix is suitable for playback on a two-channelstereo system or on headphones. Stereo Downmix adds the Center, LeftSurround, and Right Surround channels discretely to the Stereo Left andStereo Right speaker channels. This preserves correct stereo separationfor stereo-only listening.off: Audio content will not be subjected to downmixing.dYnamic range control (drc)With the DVD format, you can hear a program’s soundtrack in the mostaccurate and realistic presentation possible, thanks to digital audiotechnology. However, you may wish to compress the dynamic range of theaudio output (the difference between the loudest sounds and the quietestones).on: The ON setting is for late-night sessions or other times when youwish to retain maximum dialog intelligibility while minimizing overallvolume levels. This is applicable only for Dolby Digital soundtracks.off: To maintain full dynamic range, set to OFF.teSt toneA test tone can be enabled to help you check out availability of 5.1 channelaudio OUT and related connections.on: Test tone automatically cycles through each channel.off: Stop test tone cycle.If you do not hear the test tone, check your line and speaker connections or5.1 SPEAKER SETUP configurations.PARENTAL CONTROL SETUP MENUSome movies contain scenes that may not be suitable for children to view.Many of these discs contain parental control information that applies to thecomplete disc or to certain scenes on the disc. Movies and scenes are ratedfrom 1 to 8, depending on the country. Some discs offer more suitablescenes as an alternative.rating (north america verSion onlY)The RATING feature allows you to block access to scenes greater than therating you have set up, thereby preventing your children from being ableto view material you believe is unsuitable. To activate “Rating”, please beguided by the following:1 While at “Rating” line menu, press [ENTER].2 “Password _ _ _ _” will appear indicating that a password is needed tochange the ratings level.3 Input the password you have setup at the “Password” as discussedbelow. Press [ENTER].4 Upon entering the correct password, you can now set the parentalrating level you prefer. Use [ ] to step through the rating levels.5 Press [ENTER] to select and save the rating level you have chosen.rating 1-8Rating one (1) has the most restrictions and “8” is the least restrictive.unlockIf you select unlock, parental lock is not active and the disc plays in full.NOTEShould you forget your password, reset your password by restoring theT 585 to its factory default settings. See “RESTORE SETTINGS” below onhow to reset the T 585 to its factory default settings.countrY codeEnter the code of the country/area whose standards were used to rate theDVD video disc.1 While at “Country Code” line menu, press [ENTER].2 “Password _ _ _ _” will appear indicating that a password is needed tochange the ratings level.3 Input the password you have setup at the “Password” as discussedbelow. Press [ENTER].4 Upon entering the correct password, you can now set the CountryCode.5 Use [ ] to select the first character. Press [ ] to go to the secondcharacter.6 Use [ ] to select the second character. Press [ENTER] to finalize andsave the selected country code.OPERATIONuSing the t 585 – Setup menu1ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ