NAD T585 Owner's Manual

Also see for T 585: Catalog Owner's manual Specifications Service manual Technical bulletin

NAD T585 Owner's Manual Manual pdf 15 page image

SYSTEM SETUP MENUpaSSwordPASSWORD is needed to gain access to the “Rating” and “Country Code”items of the PARENTAL CONTROL setup menu section.1 While at “Password” line menu, press [ENTER].2 “New Password _ _ _ _” will appear indicating that you have to entera new password. “New Password _ _ _ _” will only be available whenyou use for the first time your T 585 or when you have restored it to itsdefault settings.3 Input your desired 4-digit password and then press [ENTER].4 Upon entering your new password, “Verify _ _ _ _” will appearprompting you to re-enter the same 4-digit password to verify entry ofcorrect password.5 Press [ENTER] to confirm password entry. Your new password is nowactivated.An existing password can be changed through the following steps.1 While at “Password” line menu, press [ENTER].2 “Old Password _ _ _ _” will appear indicating that you have to enter yourexisting password.3 Input your existing 4-digit password and then press [ENTER].4 “New Password _ _ _ _” will appear indicating that you now have toenter a new password.5 Upon entering your new password, “Verify _ _ _ _” will appearprompting you to re-enter the same 4-digit password to verify entry ofcorrect password.6 Press [ENTER] to confirm password entry. Your new password is nowactivated.NOTEIf the password entered is incorrect, you will remain in the same menuscreen like “Old Password_ _ _ _” or “Verify _ _ _ _”. You cannot moveforward to the next sequence unless the correct password is entered.Press [ ] to exit the sequence if you are unable to enter the correctpassword.reStore SettingSIf you desire to reset the T 585 and restore all its factory default settings, thefollowing steps should be followed.1 While at “Restore Settings” line menu, press [ENTER].2 At “Yes” menu line, press [ENTER].3 “Password _ _ _ _” will appear. In quick succession, press 5851 for NorthAmerican version model or 5852 for Europe version model.4 “Load default AH Setting!” (North American version) or “Load default CSetting!” (Europe version) will be shown in OSD – this indicates that theT 585 is already restored to its factory default settings.otherSpbc : Set Playback Control (PBC) to On or Off.on: Video CDs with PBC are played according to the PBC.off: Video CDs with PBC are played the same way as Audio CDs.autoplaY : You can set up the DVD Player to automatically start discplayback upon loading of a DVD disc. If Auto Play mode is set to ON, thisDVD player will search for the title that has the longest playback time andthen play back the title automatically.on: Auto Play function is active.off: Auto Play function is not active.NOTEThe Auto Play function may not work for some DVDs.OPERATIONuSing the t 585 – Setup menu15ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ