Getting Started with MAXserver Access Servers0038 1052. Type N and press RETURN to return to the Configuration menu, or typeY and press RETURN. The unit displays the following message:CONFIGURATION RESET TO STORED VALUES.(TYPE ANY KEY TO CONTINUE)3. Press any key. The unit returns you to the Access server Configurationmenu (Figure 28). You can then exit from the Configuration menu usingOption S or X.Exit Saving Configuration ChangesThe Exit Saving Configuration Changes option lets you exit from theConfiguration menu and store the changes that you have made.To select this option, complete the following steps:1. Type S at the "Enter menu selection" prompt of the Access serverConfiguration Menu (Figure 28). If you have made any changes, theconfiguration menu prompts:SAVE CHANGES AND EXIT (Y,N) [Y]?If the unit is configured to store parameters locally, you see thismessage:UPDATING CONFIGURATION DATA; PLEASE WAIT...If you have not made any changes, the following message displays:NO CHANGES MADE. EXIT CONFIGURATION MENU (Y,N) [Y]?2. To exit from the Configuration menu, press RETURN. If you do not wantto exit from the menu, type 'N' and press RETURN. The Configurationmenu appears.Exit Without Saving Configuration Changes
