Getting Started with MAXserver Access Servers0038 55Get File Name: Name of file.Get File Area: Area of flash card to put file.Get File CurrentState:What the card is currently doing.Get File PreviousState:Did previous GET FILE succeed.Parameter AreaUpdates:How many times the PARAM Area of the Flash cardwas updated since the server was rebooted.Updating ImagesYou must re-initialize the unit after updating thecard, if you want to use the new software versionimmediately.Use the following command to initiate and terminate flash card load imageupdates.SET SERVER GET CARD [LOADFILE] [“FILE-NAME”] IP ADDRESS [IP-ADDRESS] AREA [AREA-NUMBER]ETHERNET ADDRESS [ETHER-ADDRESS] AREA [AREA-NUMBER][STOP]Where MeansLOADFILE Loads the image file."file-name” The image’s file name. Enclose the name inquotes.IP ADDRESS Location of stored file to GET.STOP Terminates the file loading process.ETHERNET ADDRESS Location of the stored file to GET
