Getting Started with MAXserver Access Servers003864Straight Through CableCrossover CableRJ-45ConnectorsRJ-45ConnectorsFigure 12 - Crossover and Straight-through Wiring SchemesModular Adapters (RJ-45 to DB-25)You can obtain adapters with male and female DB-25 connectors fromNBase-Xyplex. These adapters direct signals from the RJ-45 connector onthe cable to the correct pin on the DB-25 connector. Figure 13 and Figure 14show how devices are cabled when you use these adapters.Using Existing MAXserver 1000-series CablingThe adapters shown in Figure 13 and are designed for use with allMAXserver units. If you have existing MAXserver 1000-series cabling atyour site, the cabling can be used to connect MAXserver ports to DTEdevices -- provided you do not need to turn on RTS/CTS flow control at theports. If you plan to connect the unit to a DCE device, you should use one ofthe adapters shown in Figure 14.