3-22 Chapter 3: 7401-2xxx and 3xxx Hardware Installation7401-K522 Pedestal MountTo install the Fixed-Angle Mount on a pedestal or the edge of flathorizontal surface, use the K522 Table Mount Bracket Kit.16363K-522 Mounting PlateFlat Horizontal SurfaceSecuring Screw1. Secure the Mounting Plate to the flat horizontal surface of choice.Position the plate to permit the scanner module to hang over theedge of the surface.2. The cables for the 7401 can be routed through an opening in theback of the Fixed-Angle Mount, or you can remove the plasticknockout in the bottom of the mount to permit routing the cablesdown through the flat surface. If you are routing cables out thebottom, drill a hole in the flat surface aligned with the rectangularopening in the Mounting Plate.3. Install the 7401 to the Mounting Plate. The slots on the bottom ofthe Fixed-Angle Mount mate to locking tabs on the Mounting Plate.4. Install the Securing Screw.
