4-24 Chapter 4: 7401-4xxx Hardware InstallationFinalizing the InstallationAfter the hardware installation has been completed, the terminal canbe powered up to finalize the installation. The operating system, alongwith platform modifications, is pre-installed. The following sections listthe steps involved to complete the system installation for each of theGold Disk operating systems.Completing the OS Installation (Win2000)The system automatically reboots when the image recovery is completeand starts the software installation. This installation also installs mostof the additional software and drivers that are included in the diskimage. Complete the installation as follows.8. After the terminal reboots, it will perform a disk check and thencontinue with the Windows 2000 installation.9. Enter the User Name and Organization.10. Enter the Computer Name for the client.11. Enter the Administrator’s Account Password (optional)12. When prompted, press Finish to reboot the client.13. Login when prompted.14. Run the MicroTouch screen calibration from the Desktop icon.Completing the OS Installation (WinXPe)The system automatically reboots when the image recovery is completeand starts the software installation. This installation also installs mostof the additional software and drivers that are included in the diskimage. Complete the installation as follows.11. Click the Admin button to login as Administrator.12. Read the EULA (End-User License Agreement) information in theDOS window, then type EXIT and press Enter to close the DOSwindow.
